5 - guard, Event, 1 assign a camera event – EZWatch HOMEView User Manual
Page 25
1-800-435-0544
Page 25
5 - Guard
Click on the guard button on the main console to open the alarm configuration panel.
You need to specify an event to be detected as well as to set up an action with which
the system will take when the specified event is detected.
E
E
v
v
e
e
n
n
t
t
There are two sources of events: Camera motion detection and system messages. You
can assign multiple events by following the instructions below.
4.1.1 Assign a Camera Event
Step 1: Select a channel from the camera list and click the insert event icon.
Step 2: Select the event you want on the event type list and then click OK.
Step 3: Configure the setting of the event type. See the following instructions.
Insert Event
Step 1
Step 2
Step 3