EZWatch HOMEView - Manual (Page 26)

1-800-435-0544
www.HOMEViewcamera.com Page 26
Event - General Motion
Detect any movement in the defined detection zone.
Enable Event
Life Cycle
Activated Period
Enable Event: Check the box to activate.
Life Cycle
Automatically cancel event when event disappears: the alarm/action will be off once
the abnormality is fixed or ends.
Manually cancel event or event continues triggered: The alarm/action will continue
until being canceled from the Main Console (Start>Open Event Report>Cancel All
Events). The user currently not at the seat watching the screen will be notified by the
alarm.
Activated Period: You can set up the system to react during a certain time period; for
example, office hours.