Barco R9001390 - Manual (Page 29)

8-1
Random Access Adjustment Mode
5975938 BARCOREALITY 9200TCR+ 020798
8
RANDOM ACCESS ADJUSTMENT MODE
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then <ENTER>
<EXIT> to return.
Starting up the Random Access Adjustment Mode
Push the control disc up or down to highlight 'Random Access' and then press ENTER.
RANDOM ACCESS
ADJUSTMENT MODE
LOAD
EDIT
RENAME
COPY
OPTIONS
DELETE
CTI
COLOR TEMPERATURE
GAMMA
STILL VIDEO
SHIFT
SIDE KEYSTONE
BLANKING
SIZE
OPTIONS
FILE SERVICE
PICTURE TUNING
GEOMETRY
File Service
Before using a new source, a correct file has to be installed. The
projector's memory contains a list of files corresponding to the most
used sources. When the new source corresponds with one of these
files, the file can be loaded and saved for future use. When there
is a little difference, the file can also be loaded and then edited until
the source specs are reached.
File annotation :
xxxxXxxxx : active pixel rating
x : source number
xxx : file extension, first character is C (for custom made
files) or S (for standard files).
The second and third character is used for a following
number (=file index)
file index for custom files : 00 to 63.
xxxxxxxx.xxx x xxxxXxxxxi
xxxxxxxx : base name, 8 characters.
i or blank : i = interlaced, blank = not
interlaced
DECODING
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT