Barco R9001390 - Manual (Page 33)

8-5
Random Access Adjustment Mode
5975938 BARCOREALITY 9200TCR+ 020798
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Rename
To change the name of a selected file.
Use the control disc to select RENAME and press ENTER. The
Rename selection menu will be displayed.
Use the control disc to select a file name and press ENTER to select.
The Rename menu will be displayed with the selected file name
already filled in, leave in the 'From file name :' area and in the 'To file
name :' area.
The first character is highlighted. Push the control disc to the right or
to the left to select the desired character. Change that character by
pushing the control disc up or down. Numeric characters can be
entered directly with numeric keys on the RCU.
Press ENTER to confirm. The renamed file is entered in the list of files.
Press EXIT to return to the Rename menu selection. No changes are
made.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
COPY FILE
Filename Src Resolution
-----------------------------------------------------
ntsc .s01 1 675x240i
ntsc .c01 1 675x240i
ntsc_2 .s01 1 675x240i
-----------------------------------------------------
Active file : ntsc.c50
Select with or
<ENTER> to accept
<EXIT> to return.
COPY FILE
Frome file name :
xga_60.s03
To file name :
xga_60.c14
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
RENAME FILE
Frome file name :
ntsc.s01
To file name :
demo.c10
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
RENAME FILE
Filename Src Resolution
-----------------------------------------------------
ntsc .s01 1 675x240i
ntsc .c01 1 675x240i
ntsc_2 .s01 1 675x240i
-----------------------------------------------------
Active file : ntsc.c50
Select with or
<ENTER> to accept
<EXIT> to return.
Copy
To copy a selected file into a new file.
Use the control disc to select COPY and press ENTER. The Copy
selection menu will be displayed.
Use the control disc to select a file name and press ENTER to select.
The Copy menu will be displayed with the selected file name already
filled in, in the 'From file name :' area and in the 'To file name :' area.
The first character is highlighted. Push the control disc to the right or
to the left to select the desired character. Change that character by
pushing the control disc up or down. Numeric characters can be
entered directly with numeric keys on the RCU.
Press ENTER to confirm. The copied file is entered in the list of files.
Press EXIT to return to the Copy selection menu. No copies are made.