BT MANGO - Manual (Page 28)

SIM PIN Error is displayed and the display will return to
the phonebook menu.
Access code
1. Select option.
2. Use or to select Access code and press OK .
3. On and Off are displayed as options. Either, select On to
activate prefix dialling. Code: is displayed. Enter the
prefix you require, e.g. 9 and select OK . You will hear a
confirmation beep and the display will return to the
phonebook menu. Or, select
Off to deactivate prefix
dialling. The display will return to the phonebook menu.
Change the SIM code
1. Select the option. The phonebook entry you used last
is displayed.
2. Select Opt , scroll to SIM Code and select OK .
3. Use or to select either Country Code , National
Code or International Code and select OK .
4. Using the keypad, enter the dialling code and select Save .
You hear a confirmation beep.
5. Press and hold to exit and return to standby.
Menu
Menu
28 Using the phone
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
SIM Country Code
These settings control the
conversion of numbers from mobile
format which may include +44 and
may have the 0 removed from the
area code. You should not normally
need to alter these settings if you
are using your BT Mango in the UK
and your mobile to call UK
numbers. If this is not the case,
then please call the BT Mango
Helpline for assistance on 0870
605 8047.
The PIN number will be displayed
as asterisks for security reasons.
You will hear a sample ring for all
settings (except Off).
If your BT Mango is connected to a
switchboard, you may need to
enter an access code in the dialling
sequence to be able to connect to
the outside line.
The access code will not be used
when you dial the number yourself
(rather than for example from the
phonebook) to allow you to make
calls to other switchboard
extensions.