BT MANGO - Manual (Page 9)

Your BT Mango additional handset is pre-registered to
the base so, once charged, is ready for use. The handset
number will be shown in the display.
Set the date and time
We recommend that you now set the day and time so
they can be recorded with each answering machine
message you receive.
Set the time
1. Press or until Date & Time Settings is displayed
then select the OK option.
2. Press or until Set Time is displayed, select the
OK option. The first digit is highlighted.
3. Enter the current time in 24-hour format, e.g. for
9:24pm press 2 , 1 , 2 , 4 , then select the OK option.
You will hear a confirmation tone.
4. Press and hold to exit and return to standby.
9 Getting started
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
If you subscribe to a Caller Display
service from your network provider
the time will be set when you
receive your first call.
Battery performance (continued)
For instructions on how to install
new batteries, see page 87.
After charging your handset for the
first time, subsequent charging
time is about 6–8 hours a day.
Batteries and handset may become
warm during charging. This is
normal.