3 sniffer line, Sniffer line – INFICON HLD6000 Refrigerant Leak Detector User Manual
Page 16
16
4 Description
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
HLD
6000
, k
ina4
3
e1-
a
, 140
8
Fig. 3: View from below
4.3
Sniffer line
You need a sniffer line to operate the device. There are sniffer lines for verification of a sin-
gle gas or sniffer lines for the verification of several gases
see "2.1 Intended use", page 9
and
see "10.1 Accessories and spare parts", page 67
. The sniffer line which is delivered as
standard is 4.8 m long.
The sniffer line is made of a black line, a sniffer probe, and a sniffer tip. The filter holder at
the end of the sniffer tip is made of plastic. This reduces the risk of scratching the surfaces
to be sniffed.
Sniffer tip
There are rigid and flexible sniffer tips of different lengths,
see "10.1 Accessories and spare
Sniffer probe
During measurement it is possible to switch the setpoint using the button on the sniffer
probe, provided that this function is activated,
see "6.4.2 Setting up the sniffer probe",
.
The button on the sniffer probe is also used during calibration,
with an internal COOL-Check", page 44
.
a
Rating plate with information regarding
supply voltage, serial number and
productio date.
b
Filter plates
c
COOL-Check calibration leak behind the cover