B&B Electronics MES1A - Manual (Page 30)

Configuring the MES1A/B
Manual Documentation Number: MES1A/MES1B-2106m PN7138-rev001
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
20
Navigating the Configuration Menu
On initial power-up there are four sections in the MES1A/B configuration
menu. A fifth menu item appears if you are configuring a Modbus Master
device. The menu items are:
6. Network/IP Settings
7. Serial & Mode Settings
8. Modem/Configurable Pin Settings
9. Advanced Modbus Protocol Settings
The following menu item 5) appears if the MES1A/B is configured as a
Modbus Master in section 2) Serial Protocol
10. Unit ID to IP Address Table
Each section of the configuration menu includes several parameters.
11. Begin the configuration by typing the menu section number at the
Select Command or parameter set (1..4) to change:
prompt.
The first configuration parameter of the section will appear at the
bottom of the pane. The current setting is shown in brackets.
Example:
Figure 15. Setting the IP Address