Kisan Electronics ManualtailBlazer - Manual (Page 14)

Page - 12
200GW
tailBlazer
200GW has (3) screw-in terminals:
„ Input Terminal: for Brake Input
„ Output Terminal: for Output to the bulbs
„ Ground Terminal: for the Ground
„ Modulates the Brake bulb for a 4-sec Deceleration Warning
Trigger voltage: 10.9 volts
DO NOT EXCEED THE RATED WATTAGE.
Warranty coverage will be denied, if unit is damaged from overload.
(1) WIRE SPLICE-IN
200GW can handle up to (4) brake light bulbs, which
are typically 25 watts each. If you have a trailer with
more than (2) bulbs, it will exceed the rated wattage.
Max Load is (6) x25W or 150W
(1) WIRE SPLICE-IN