Kisan Electronics ManualtailBlazer User Manual
Page 25
Advertising
Page - 23
BMW: K1100LT, RT series & Older models 20W-S or 20W-D
On most 1100 models, the
taillight assembly has (2) single
contact bulbs. Replace the
top mounted brake bulb with
20W-S tailBlazer.
Note! On models with the
“Lamp Check” circuit,
use ‘Z” version.
POLARITY CHECK:
If the tailBlazer fails to execute the 4-sec flash pattern upon applying
brakes, check for correct polarity of the socket.
Brown wire is for
ground (body of the
socket) and Grey
wire supplies the
power to the
contact.
Access for (2)
wing-nuts here
Advertising