BT BF900 - Manual (Page 11)

10 Switch the power ON
The machine will beep and go into standby
mode. The screen displays the date and time.
If the incorrect date and time are shown,
change them by following the steps shown in
To change the date and time , p11.
10
Setting up
11 Enter your telephone number
You can have your fax or phone number,
printed at the very top of each fax you send.
The number can be up to 20 digits long.
• Press the FUNCTION button. Display shows
FUNCTION MODE 0~9,#,*,<,> .
• Press 9 (or the buttons) to display
PROG USER DATA 0~9,#,*,>, ENTER .
• Press the ENTER button. Display shows
PROG USER DATA 1-6, <,> .
• Press 1 (or the arrows) to display
YOUR TEL. NO. 1-6 ENTER .
• Press the ENTER button. Display shows
TEL=XXXXXXXXX PRESS ENTER .
• Use the keypad to enter your fax number.
To enter a space, press the PAUSE/REDIAL
button. To delete the number, press the
CLEAR button.
• Press the ENTER button to confirm. Display
returns to PROG USER DATA allowing you to
enter other user information.
• Press the STOP button to return to standby.
FUNCTION
9 1
ENTER PAUSE\
REDIAL
STOP
Remove the clear plastic protective film from the
display.