BT BF900 - Manual (Page 57)

56
Technical information
Technical information
Choosing a location
Your BF900 should be kept clear of dust,
moisture, high temperature and vibration and
should not be exposed to direct sunlight. Don’t
install it close to radiators or air conditioning
outlets or in excessively warm, humid or dusty
places.
Connecting to the UK network
The BF900 is tested and approved for
connection to the UK network, provided that it
is used in accordance with the guidelines in
this booklet.
Approval number
Approved for connection to telecommunication
systems specified in instructions for use subject
to conditions set out in them. CE compliant to
89/336/EEC (EMC Directive) and 73/28/EEC
(low voltage directive).
Approved for use
This apparatus has been approved for use with
the following facilities:
– storage of telephone/fax numbers for
retrieval by one-touch or predetermined
code (if problems occur, verify the stored
numbers)
– automatic call initiation
– operation in the presence or absence of
initial or secondary proceed indication
– automatic dialling facilities
– automatic storage of the last number
dialled
– automatic repeat attempt facilities
– auto answer
– auto clear from the call originating end
– call progress monitor
– modem
– fax switch
– series connection facility
Any other usage will invalidate all the approval
of the apparatus if, as a result, it then ceases to
conform to the standards against which approval
was granted.
Warning
The apparatus is only designed to be operated in a
normal office or domestic environment where the
relative humidity does not exceed 60%. It should
not be used in bathrooms or near water.