Koolance ICM-PC54I - Manual (Page 5)

6 7 User Manual
In some computer chassis, the fan grill is at the very top or just below the power
supply, requiring the radiator and pump to be lowered.
If radiator adjustment is necessary, loosen the 2 screws on each side of the
bracket. Slide the radiator and pump assembly up or down to the desired height,
and retighten all 4 bracket screws.
Loosen bracket screws (2 per side) Slide radiator/pump to desired height and
retighten 4 bracket screws
If the radiator is lowered on the bracket,
the exposed area above it must be
sealed. This is to properly direct airflow
through the radiator.
Use the included self-adhesive pad to cover
this opening in the bracket.
Temporarily slide the adhesive pad between
the radiator and bracket.
Trim the pad so it’s no larger than
the area needed to cover the bracket
opening.
Remove the backing from the adhesive pad.
There are flanges around
the bracket designed for
the adhesive pad. Push the
sticky pad onto these wider
areas of the bracket.