Lenze 8400 motec Mounting Instructions - Manual (Page 58)

Settings
Setting with the diagnosis terminal (keypad)
6
l
58 EDK84DGDVBxxx4 DE/EN/FR/ES/IT 5.3
"SET" mode
The right softkey "SET" serves to change from the display mode to the SET mode.
In the SET mode, the speed setpoint can be changed and the controller can be
enabled/inhibited (RFR/run). The SET mode can be quit with the right softkey
"DISP". The change of the modes must always be confirmed with the right
softkey "OK".