BT DECTfax Fax machine and digital telephone system - Manual (Page 14)

Setting up
12
1 Plug the charger into the mains.
2 Place the handset into the charger. The
handset display shows the moving charging
icon.
3 When the battery is fully charged the
charging icons stop moving and begin to
flash.
7 Customising your DECTfax
Your BT DECTfax can be customised to suit
your personal requirements. You can
customise your DECTfax in two ways; either
by entering the appropriate function code or by
scrolling through the on-screen menus. The
majority of instructions in this user guide
involve entering function codes as this is a
more direct way of operating your fax machine.
You can print out a functions list, this allows
you to see all the functions of your DECTfax at
once, along with the function codes to operate
them, see ‘Printing out the functions list’ on
page 36.
There are a number of buttons which are used
to access and customise the functions of your
DECTfax:
Button What it’s used for
Function Enables you to enter
FUNCTION mode
Start Confirms an entry or option
Stop Enables you to exit the
FUNCTION mode. Any changes
which were not confirmed will
not be saved
ᮣ Moves to the next option or
moves the cursor right
ᮤ Returns to the previous option or
moves the cursor left
Stop Enables you to exit the current
function or go back through
the menus
Battery low warning
If, during a call, the battery charge is running low,
the handset beeps every 4 seconds.