BT DECTfax Fax machine and digital telephone system - Manual (Page 35)

The customised method
Use this method if you:
Have set the base station handset security
code to a number other than 0000.
Want to register a handset to more than one
base station.
Want to allocate a handset with a handset
number other than the next sequential one.
1 At the base station press Function , then 8 ,
then 8 , then Function again.
2 At the handset press OK then 9 , then use the
▲ and ▼ buttons to scroll to the first empty
location, indicated by a line of dashes in the
display.
3 Press OK . The telephone icon flashes in the
display.
4 After a few seconds the display shows four
dashes (
- - - - ) to prompt you to enter the
handset security code
5 Enter the code that is on the base station,
either 0000 or whatever you have changed
it to.
6 Press OK and the display will show the
available handset numbers ( 1-4 ).
7 Press the number you want on the keypad -
the display will show this number to indicate
that the handset is registered.
To change the handset security code
1 Press Function , then 8 , then 7 .
2 Press Function . The display shows OLD CODE
then ✱ ✱ ✱ ✱ .
Enter the old code. This should be 0000, if it
has not already been changed.
3 The display shows
NEW CODE then
✱ ✱ ✱ ✱ .
Enter the new code. When the 4th digit has
been entered, the display returns to standby.
To register a handset to more than one
base station
Use ‘The customised method’ to register a
handset with up to 4 DECT base stations.
A handset registered to more than one base
station will stay ‘linked up’ to its current base
station as long as it is in range of it. As the
handset moves out of range, it will ‘link up’ with
the next base station it comes into range of.
Using additional handsets
33
TU
V 8
TU
V 8
TU
V 8
PQ
R
S 7
WX
Y
Z 9