BT DECTfax Fax machine and digital telephone system - Manual (Page 32)

Using your handset
30
3 Press OK when you have the number
displayed then use Clr to delete the number.
4 Enter the new phone number.
5 Press OK again to confirm the change.
To dial a number from the directory
There are two ways to do this: you can display
either the two-digit reference number, or the
telephone number itself.
To display the telephone number
1 Press the ▲ or the ▼ button to access the
memory.
2 Use the ▲ and ▼ buttons to scroll through
the telephone numbers until you see the one
you want.
3 Press the Talk button and the number will
dial automatically.
To display the reference number
1 Press the ▲ or the ▼ button.
2 Enter the reference number you require, for
example
07 .
3 Press the Talk button and the number will
dial automatically.
To dial a number from the base station
directory
1 Press the i button on the handset.
2 Use the ▲ and ▼ buttons to scroll through
the telephone numbers until you see the one
you want. (Names will not be displayed at
the handset).
3 Press the Talk button and the number will
dial automatically.
You can dial from the memory directly by entering
the two-digit reference number followed by # . For
example 07 then # will immediately dial that
telephone number.
The display shows up to 12 digits. If the number has
more than 12 digits, use the ✱ and # buttons to
scroll backwards and forwards through the number.