BT DECTfax Fax machine and digital telephone system - Manual (Page 34)

32
Multiple registration
You can use up to 4 handsets with your
DECTfax base station. A handset can be
registered with up to 4 DECT base stations.
For each handset to interact with the base
station, they must be registered with it. Your
handset is pre-registered with the base station
as handset number
1 .
Once you have more than one handset
registered with your DECTfax base station,
you can transfer calls from the base station to a
handset, or from one handset to another.
To register a handset
A handset can be registered to the base station
only if the handset security code on the base
station matches the code on the handset. Both
these codes are preset to 0000, but you can
change the code at the base station to make it
possible to register a handset to the base only
with your authorisation.
If you want to keep the code as 0000 then you
can register handsets using the simple method.
If you want to change the code, or register a
handset to more than one base station,
handsets must be registered using the
customised method.
The simple method
Use this method if you have only one base
station and the handset security code is 0000.
1 At the handset press OK then 6 . The
connection icon will flash.
2 At the base station press Function then 8
then 8 . The display shows 88 HANDSET--
REGI
.
3 Press Function . The base unit searches for
handset to be registered. Once found, the
handset is assigned the next available
handset number. The handset display now
shows the handset number it has been
assigned and the connection icon will go out.
Using additional handsets
MN
O 6
TU
V 8
TU
V 8