3 user interface dialogs, 1 registry "acu state" - show ups state, User interface dialogs – Lenze ACU UPS for Industrial PCs User Manual
Page 10: Registry "acu state" − show ups state, Software operation
Software operation
User Interface Dialogs
Registry "ACU State" − Show UPS State
l
10
LDCDP−EPC50ACU EN 4.0
2.3
User Interface Dialogs
2.3.1
Registry "ACU State" − Show UPS State
ACU USV V2.x:
Dialog Box
Value Range
Explanation
Type
−
Hardware Type
Power
OK/Fail
Input Voltage State; OK or Failure
UPS
On/Off
On: UPS functionality activated
Buffer Time [s]
0.00 ... 64.00 s Period of time to wait until a voltage failure is reported by the
ACU UPS control unit. Thus, voltage fluctuations are filtered
out.
Delay Time [s]
0 ... 240 s;
infinite
Maximum period of time the industrial PC can be fed by the
battery/capacitor pack, depending on the hardware.
ACU State
−
Current ACU State Display
Firmware Version
−
Displays the current ACU firmware version
)
Note!
A change in the UPS State is displayed with a delay.