Lenze ACU UPS for Industrial PCs - Manual (Page 9)

Software operation
Open User Interface
2
l
9 LDCDP−EPC50ACU EN 4.0
2.2 Open User Interface
)
Note!
For configuring the ACU software, administrator rights are required.
Otherwise, only actual states can be displayed.
ƒ If you want to View ACU UPS Configuration, double−click the ACU symbol in the
information bar of the Windows task bar.
The ACU software dialog is displayed. The registries of this dialog show the ACU UPS
software settings.
Various settings which affect software only can be made (e.g. the period of time from
identifying a voltage failure to the shutdown of the IPC). Settings affecting the ACU
UPS control unit hardware cannot be made.
EPC50ACU−005
Fig. 2−4 Example: ACU software dialog ACU UPS V2.x
ƒ If you want to Configure the ACU UPS Control Unit, double−click on the ACU symbol
in the Windows control panel.
The ACU software dialog is also displayed. Unlike the process described above, the ACU
control registry is displayed as well which helps you configure the behaviour of the ACU
UPS control unit in the case of a voltage failure.
EPC50ACU−004
Fig. 2−5 Example: ACU software dialog ACU UPS V2.x
Information on the registries of the user interface of the various ACU UPS versions is
provided in the following chapter.