Lenze ACU UPS for Industrial PCs - Manual (Page 7)

Software operation
Start and Close Software
2
l
7 LDCDP−EPC50ACU EN 4.0
2 Software Operation
2.1 Start and Close Software
Start
After the IPC has been booted, the software starts automatically and then runs in the
background. A symbol pops up in the information bar.
EPC50ACU−001
Fig. 2−1 Windows task bar with ACU UPS symbol
)
Note!
If an L−force Controller is delivered with ACU UPS but without a battery pack,
the ACU UPS software is installed but UPS support is deactivated. In this case,
there will be no ACU symbol in the information bar of the Windows task bar.
In the "ACU Control" registry, UPS support can be(
¶ 12)activated and
deactivated.
Double−click the ACU symbol in the control panel to start the software manually.
EPC50ACU−011
Fig. 2−2 Control panel with opened ACU software window (in our example: ACU UPS V3.x)