Lenze IPC Operating System Windows CE Thin Client - Manual (Page 19)

Operation
"F−Keys" register
3
l
19 LDCDP−11999 EN 3.0
3.5 "F−Keys" register
In the "Connection" register you can configure the function keys (F−keys) and the software
keyboard.
Dialog Box Function
Function Specify function of the respective F−key.
The functions of keys F1, F2, and F3 can be executed in the standard mode.
The key with the spanner symbol corresponds to the F1−key after switch−over to the
service mode. This key is fixedly pre−assigned on the Thin Client with the "Restart"
function (of the Thin Client) and cannot be changed.
Adjustable functions:
none: Key is without function.
Run Program: Starts the program that is specified in the "Parameter" field.
Software Input Panel: Shows the screen keyboard.
Right Mouse Click: Pressing the right mouse button is emulated. By this, the
context menu can be called during a server session without mouse operation.
Calibrate Touch: Starts the calibration software for the touchscreen.
Terminal Connection Manager:Places the «Terminal Connection Manager» in the
foreground or the background, which means that it can also be shown during an
active server session. However, changes to the configuration are only accepted after
the connection is established again.
Parameter Only for the "Run Program" function: File path and name of the program that is to
be executed when the key is pressed.
Software Input Panel Style Set style of the on−screen keyboard.
LargeKB: Alphanumerical keyboard, normal size
XLargeKB: Alphanumerical keyboard, oversize
LargeNUM: Numerical keyboard, normal size
XLargeNUM: Numerical keyboard, oversize
)
Note!
You can assign the command for opening the command line to a function key
(Function: Run Program; Parameter: cmd.exe)
In the service mode the display brightness can be set via F2/F3.