Lenze IPC Operating System Windows CE Thin Client - Manual (Page 9)

Operation
"Configure" register
3
l
9 LDCDP−11999 EN 3.0
3.4 "Configure" register
In the "Configure" register you create or edit connections.
Dialog Box Function
Connection Name List of the connections configured. The standard Microsoft connection "Default
Remote Desktop Connection" is always available.
Type Connection type; at present only "RDP" is possible here.
Startup Starting performance
Default: Standard connection
Auto−start: The connection is configured for an automatic start.
[Add...] Create new connection via the "WTS Connection Wizard" ( ^ 10).
[Edit...] Edit connection selected in the list field ( ^ 12).
[Delete] Delete connection selected in the list field after a confirmation prompt.
[Startup...] Set starting performance. The following options can be set:
Make the selected connection your Default connection: The connection selected is
preselected in the "Connections" register.
Automatically start the selected connection at startup: The connection selected is
started automatically at the next start−up of the Thin Client.
Please note that the server must be available in the network, i.e. it must be already
started. The Thin Client does not wait until the server is booted up. For further
information see
^ 20 (LAN).