Lenze Global Drive Control (GDC) - Manual (Page 10)

Global Drive Control | L-force Controller as Gateway
Controller as gateway
System overview
10
L
1.1 EN - 10/2010
4 Controller as gateway
This chapter describes how to use the gateway function of a controller to establish an on-
line connection to a field device.
4.1 System overview
[4-1] Exemplary system overview with an Engineering PC and an L-force Controller
 With the »Global Drive Control« (»GDC«) you can access field devices like 9300, 8200,
and ECS.
 If the field devices are operated on an L-force Controller via the CAN/EtherCAT fieldbus,
»GDC« provides the possibility of using the controller as gateway.
 The »GDC« is connected to the L-force Controller via Ethernet.