Lenze Global Drive Control (GDC) - Manual (Page 16)

Global Drive Control | L-force Controller as Gateway
Establishing an online connection
Online mode via Controller gateway function
16
L
1.1 EN - 10/2010
5.3 Online mode via Controller gateway function
 After the parameters have been read in successfully, the drive is in the online mode. The
drive parameters are available in the »GDC«:
In a separate window, the »GDC« provides an overview of the selected drives at the system
bus:

Note!
The »GDC« displays the selected drive in the Drives connected to bus dialog
window via the gateway function. More drives can be connected to the system
bus, which are not visible in the overview of the dialog window.