Lenze Global Drive Control (GDC) User Manual
Page 13
Advertising
1.1 EN - 10/2010
L
13
Global Drive Control | L-force Controller as Gateway
Controller as gateway
Controller as gateway via EtherCAT
Access the Gateway -> EtherCAT dialog window via the Parameter button.
– Set communication parameters:
To set the communication parameters, you must enter the following configuration da-
ta:
Confirm data by OK.
Information
Function
IP address
IP address of the L-force Controller which serves as gateway for communica-
tion
EtherCAT interface
Number of the EtherCAT interface
to which the required field device is connected
EtherCAT Address
Node address of the field device which you want to trigger via the gateway
function of the L-force Controller (fixed address addressing).
Advertising