2 remedy in the event of an error – Lenze Global Drive Control (GDC) User Manual
Page 15
Advertising
1.1 EN - 10/2010
L
15
Global Drive Control | L-force Controller as Gateway
Establishing an online connection
Remedy in the event of an error
The parameters of the connected drive are read from the connected drive.
5.2
Remedy in the event of an error
If no drive can be found, the »GDC« displays an error message:
Proceed as follows to eliminate the error:
– Check the physical connections to the drive controller and the L-force Controller,
– Make sure that the communication parameters set for the physical configuration are
correct.
– Make sure that the device description file for the corresponding device is installed.
Information on the respective target system of the »GDC« can be found in the
corresponding hardware manual.
Advertising