5 establishing an online connection, 1 connect to drive, Establishing an online connection – Lenze Global Drive Control (GDC) User Manual
Page 14
Advertising
Global Drive Control | L-force Controller as Gateway
Establishing an online connection
Connect to drive
14
L
1.1 EN - 10/2010
5
Establishing an online connection
5.1
Connect to drive
Tip!
Exit the offline mode by pressing the F4 button if the F2 button is deactivated.
Click F2 to call the Connect to drive dialog window:
Activate the search process by pressing the Connect button to establish an online
connection to the drive.
Note!
In order to be able to establish an online connection to a controller with the
gateway function via EtherCAT, the EtherCAT master has to be in the PREOP (Pre-
operational) or OP (Operational) state.
Note!
A manual assignment of the device description via the F3 button is not required.
Advertising