Lenze Global Drive Cam Loader - Manual (Page 32)

Global Drive Cam Loader
Operation
Editing settings on the worksheet
32 1.1 EN - 05/2005
L
6.3.1 Adding a slave
New slaves are added at the end of the list. You can enter a symbolic name for the new
slave which will be indicated on your worksheet.
[ The name of the slave is also used as name for the LCx file.
[ The Cam Loader creates a subdirectory with the same name in the project directory. The
subdirectory is used to store the LCx file/script file and, in turn, contains a subdirectory
called "Import data" which is used in the default setting to store the import files.
X
How to add a slave to your worksheet...
1. Select EditWAdd slave.
2. Go to the Project settings dialog box and enter the name and the properties of the
slave.
• The maximum product number determines the minimum number of curves.
The maximally possible entry depends on the target system.
4How to define the properties of the slave...
(^ 27)
3. Click OK to confirm the settings and close the dialog box.
6.3.2 Selecting the properties of a slave
The properties of a slave can always be changed.
X
How to change the properties of a slave...
1. Double-click the grey field with the name of the slave whose properties you want
to change on your worksheet.
2. Go to the Project settings dialog box and enter the new settings.
4How to define the properties of the slave... (^ 27)
3. Click OK to confirm the settings and close the dialog box.