Lenze Global Drive Cam Loader - Manual (Page 50)

Global Drive Cam Loader
Appendix
Error numbers, causes & remedies
50 1.1 EN - 05/2005
L
8 Appendix
8.1 Error numbers, causes & remedies
Error number Cause Remedy
Script file errors
D000h
An error occurred during opening the script
file.
Check path and/or file name.
D001h An error occurred in the script file data. Save project again to create a new script file
or correct script file manually with a text ed-
itor (the faulty key is indicated in the error
message).
Communication and download errors
D100h
Error during the start of the "OPC Ctl" compo-
nent.
• Component has not been installed or has
not been registered correctly.
Re-install Cam Loader.
D101h No connection with the OPC server. Check if the OPC server has been installed
correctly.
Re-install Cam Loader.
D102h OPC server is not in status "Running". Re-start PC.
D103h Error during creating an OPC item. Re-install Cam Loader.
D104h Error during download. The error message contains causes and infor-
mation about troubleshooting.
D105h Error during connection with the OPC server. Re-start PC or re-install Cam Loader.
D106h Error during disconnection from the OPC
server.
Re-start PC or re-install Cam Loader.
Errors during data import
D201h
Error during the start of the "DriveData" com-
ponent.
• Component has not been installed or has
not been registered correctly.
Re-install Cam Loader.
D202h Error during reading the product data (mo-
tion profiles, cam tracks, position markers).
Check path and/or file name of the product
data.
D203h Error in the product data (motion profiles,
cam tracks, position markers).
Check and correct file with the editor.
D204h Error during reading the GDC parameter file.
Faulty GDC parameter file data.
Check path and/or file name of the GDC pa-
rameter file.
Check and correct file with the editor.
Errors during the creation of the LC9 file
D301h
Error during the start of the "DriveLC9" com-
ponent.
• Component has not been installed or has
not been correctly registered.
Re-install Cam Loader.
D302h Error during setting the cam profile data
(points).
Evaluate error description.
D303h Error during setting the cam data. Evaluate error description.
D304h Error during setting the position data. Evaluate error description.
D305h Error during writing the LC9 file. Check path for the LCx file.
Check if there is enough free space available
on your drive.
Errors during the creation of the LC7 file