Lenze Global Drive Cam Loader - Manual (Page 39)

L
1.1 EN - 05/2005 39
Global Drive Cam Loader
Operation
Connection with the OPC server
6.4 Connection with the OPC server
The Lenze DriveServer is used for communication between Cam Loader and target system
and LCx file transfer.
• The DriveServer provides easy integration of drives into open automation structures
based on OPC (OLE for Process Control).
• A specially adapted variant of the DriveServer and the bus server for the system bus
(CAN) is part of the Cam Loader installation package.
X
Select FileWConnect to OPC server to connect the Cam Loader to the OPC server or
cancel the connection.
A hook in front of the menu command indicates the connection with the OPC serv-
er.
6.5 Downloading the drive data
If connection with the OPC server has been established it is possible to transfer the drive
data for several slaves in one step. 4Connection with the OPC server
[ The configuration files (LCx files) for the selected axes are created first.
[ If you have an online connection with the corresponding target system the LCx file will
be directly transferred to the target system.
)
Note!
With the 9300 servo PLC, the LC9 file can only be downloaded if the target sys-
tem includes a DDS project based on Template Cam.