Memmert AtmoCONTROL FDA Version 2.X.X - Manual (Page 3)

D30396 | Date 09/2014 3
AtmoCONTROL FDA Version
About this manual
Purpose and target group
This user manual describes the installation and use of the MEMMERT programming software
AtmoCONTROL. It is intended for use by trained personnel of the operator, who have the task
of programming/operating MEMMERT appliances.
If you intend to work with the software, please read this manual carefully before starting. Fa-
miliarise yourself with the software and simulate various tests before transferring programmes
to the appliance. Incorrect use could result in damage to the appliance and/or to the chamber
load.
If there is something you do not understand, or certain information is missing, ask your supe-
rior or contact the manufacturer. Do not do anything without authorisation.
Other documents that have to be observed
Please also read the user manual for the respective appliance or appliances to be operated
with AtmoCONTROL and familiarise yourself with it.
Storage and resale
This manual should always be kept in a place where those working with the software have
access to it. It is the responsibility of the operator to ensure that persons who work with or
will work with the software are informed as to the whereabouts of this user manual. We rec-
ommend that it is always stored in a protected location close to the computer on which the
software is installed. Make sure that the manual is not damaged by heat or damp.
Update
The current version of AtmoCONTROL and this manual are available for download at www.
memmert.com/de/service/downloads/software/ memmert.com/de/service/downloads/software/.