Cx-3, Cleanup – MK Diamond CX-3 User Manual
Page 20
20
CX-3
®
CLEANUP
Cleanup
Engine parts are extremely hot following use, allow engine to cool 1/2-hour
before cleaning. Use care during cleanup to avoid injury.
CAUTION
1. To extend operating life, the Concrete Saw should be cleaned following every
use.
2. Using a garden hose or pressure washer is not advised as it can force water
into the air cleaner or muffler opening.
3. Use care when cleaning around electrical components.
NOTE:
(A)
Verify the engine is off and cool
before beginning to clean. Clean
the CX-3
®
with soap and water.
(B)
Clean around the Console.
(C)
Clean the Depth Control Screw.
(D)
Clean water system outlets, includ-
ing water tubes in blade guard.
(E)
Clean the remainder of the exte-
rior surface (except the engine).
Emergency Engine Shutdown
(A)
Place Engine Master Switch in
the OFF position.
(B)
Move the Throttle Lever to lower
blade speed. Place Fuel Valve in
the OFF position.