MK Diamond CX-3 - Manual (Page 21)

21
• NEVER lubricate components or attempt service on a running machine.
• Keep the machinery in proper running condition.
• Fix damage to the machine immediately and always replace broken parts, or missing decals.
CX-3
®
MAINTENANCE
New Maintenance
Perform the following after initial purchase and operation of the saw.
(A)
Change engine oil after
first month or first 20 operating
hours (See Engine Manual).
(B)
Check and adjust tension on
all belts following first
48 hours of operation
(See belt section).
Maintenance Following Use
The following maintenance should be performed following each use.
(A)
Shut down the Engine.
(B)
Check Air Filter
(See Engine Manual).
(C)
Lubricate the Grease Fitting.
(D)
Lubricate the pivot point of the
Pointer.
(E)
Lubricate the Cooling
Supply Valve.
(F)
Verify the tightness of all bolts
and screws.
MAINTENANCE SAFETY