MK Diamond CX-3 - Manual (Page 30)

30
(G)
Loosen the Motor Tension
Arm. Push the Motor forward to
loosen the belt.
(H)
Remove the old belt from the
Engine and Blade Shaft Pulleys.
(I)
Clean and verify the alignment
of the Engine and Blade Shaft
Pulleys.
(K)
Verify the belt is seated in all
grooves of the Engine and Cut-
ting Drum Pulleys.
(M)
Check belt for proper tension
(Proper tension is approxi-
mately 1/8-inch deflection of the
belt).
(N)
Repeat Steps L and M until
Proper Tension is achieved.
(O)
Tighten the Engine Mounting Bolts.
(L)
Tighten the Motor Tension Arm.
(J)
Obtain and install a new
belt onto the Engine Blade
Shaft Pulleys
CX-3
®
MAINTENANCE