MTS FlexTest Models 200 - Manual (Page 316)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Aero Multibox Overview
Aero Multibox Systems 316
Use the CMT to Register Multiple Controllers
1. Make sure that all controllers are connected properly (including all network
connections).
2. Apply power to each controller.
3. Allow the CMT to detect each controller.
Each controller that is detected appears in the CMT window. The
Controller Name typically appears as Unregistered_0 and Unregistered_1.
4. In the Controller Management Tool (CMT) window, click Register
Multiple Controllers.
5. Make sure that the Registered column for each box indicates Yes.