MTS FlexTest Models 200 - Manual (Page 318)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Aero Multibox Overview
Aero Multibox Systems 318
Select a Controller and run the Detect Hardware Feature to Help Build an Hwi file
1. Start the Hwi Editor application.
All Programs > MTS 793 Software > Service Tools > Hwi Editor
The following window will open showing all the controllers that are
available on the controller network (only two in this example).
2. Select the Controller that you want to create an Hwi file for and click OK.
3. In the Hwi File Editor window, set the Controller Type.
4. On the Options menu, click Detect Hardware.