MTS Series 793 Application - Manual (Page 179)

MTS MultiPurpose TestWare® Command Processes 179
Chapter 12
Command Processes
Command Process Types
I CON P ROCESS N AME D ESCRIPTION
Segment Command
Process Produces a monotonic command signal.
Cyclic Command Process Produces a cyclic command signal.
Dwell Command Process Produces a dwell command signal.
Profile Process Produces a command signal based on the contents of a “profile”
created with a text editor or the Profile Editor application.
External Command
Process Enables a command signal from an external program source.
Sweep Command Process Produces a command signal that sweeps between two frequency
values.
Signal Based Command
Process Allows you to generate command based on signal values specified in
a predefined lookup table. The lookup table is contained in a tab-
delimited text file which defines the relationship between command
and signal values.
Profile with ALC Process * Produces an ALC compensated command signal based on the
contents of a “profile” created with a text editor or the Profile Editor
application.
Cyclic with ALC Process * Produces an ALC compensated cyclic command signal.
Model 793.71/72 Time
History Output Process
*
Produces a command signal based on an MTS RPC II or RPC III time
history file. This process can also perform time history data
acquisition synchronized with the command.
Road Surface Output
Process
*
Produces a command signal that controls multiple station channels
with an MTS RPC II, RPC III, or RPC Pro Road Surface file.
*Process not included with all systems.