MTS Multipurpose Simulated - Manual (Page 87)

Precrack Parameters
Precrack Parameter Values
Value to Use for Simulation Parameter
25.4 mm Precrack Final Crack Limit
10 Hz Precrack Frequency
0.1 unitless Precrack Load Ratio
10% Precrack Lower Least Squares Fit
Percentage
90% Precrack Upper Least Squares Fit
Percentage
1000000 count Precrack Cycle Limit
347.851 N/mm^1.5 Precrack Final Maximum K
KIC Parameters
KIC Parameter Values
Value to Use for Simulation Parameter
400 N/s KIC Force Ramp Rate
Data Storage Parameters
Data Storage Parameter Values
Value to Use for Simulation Parameter
100 count Store Every Nth Precrack Cycle
20 Hz KIC Data Frequency
0% Precrack Save Percent Limit
Test Termination Parameters
Test Termination Parameter Values
Value to Use for Simulation Parameter
Yes KIC Use COD Limit
MTS TestSuite 87
5.0 Running Simulation Tests