MTS WIFT Mini Transducer Interface - Manual (Page 55)

Transducer Interface Electronics Installation
SWIFT ® Mini TI Installation 55
The data recorder should also be connected to the battery negative terminal.
(See the following figures.)
Suggested Grounding for a single TI Box
Suggested Grounding for a Multiple TI Boxes
3. Secure the TI box so that it will not move during data collection.
Note If the TI box is not properly secured, it can dislodged from the vehicle.
4. Cover the J4 I/O and J5 USB connectors to protect the connectors from
contamination.
5. Turn on the TI.
Press and hold the Power switch until the indicator lights. All other
indicators will light until initialization is complete and then turn off. Only
the Power indicator should remain lit.
12 Vdc
Transducer Interface S10-25
Data Recorder
12 Vdc
Transducer Interface
Transducer Interface
Transducer Interface
Transducer Interface S10-26
Data Recorder