Opticon PHL 7200 User Manual - Manual (Page 27)

OPTICON
User's manual
PHL-7000 series
2-8
2.3 Charging the Battery Pack
Before using the PDT, install and charge the battery by executing the steps described in this
paragraph.
2.3.1 Installing the battery pack
1. On the PDT attached with a hand-strap, detach the hand-strap.
Figure 2-7 Release the Hand strap from PDT
2. Turn both battery cover latches downwards and lift the battery cover away from the PDT.
Figure 2-8 Detach the battery cover from PDT