Oyen Digital DATATALE RS-M2QJ 2-BAY RAID - Manual (Page 10)

10
INSERTING/REPLACING THE HARD DRIVES IN
THE RAID SYSTEM
To assemble the RAID System, please follow the steps listed in the instructions
below:
1. Place the RAID System with its Front View facing you. Position both hands
on the front edge. Simultaneously, push the lid in the direction away from you,
front to back, using your thumbs.
A “click” sound would indicate release of the top lid’s security clasp.
2. Lift the top lid up to remove and expose the Top View (or Disk slots). Take
out the handles from the enclosure itself and locate the HDD screws in the
packaging box.