Oyen Digital DATATALE RS-M2QJ 2-BAY RAID - Manual (Page 27)

27
Rebuild
To setup Rebuild under RAID 1 mode, please complete the following steps:
The use of identical hard disks from the same manufacturer, with the same
capacity and RPM is highly recommended.
1. Under RAID 1 mode, if one of the hard disks fails or a hard disk is
removed, a popup window stating “Attention! Hot Swap” will appear. Click
on “Ok” icon to continue.
2. Another popup window will appear stating, “Attention! RAID 1 Degrade
Mode”. Click on “Ok” to continue.