Oyen Digital DATATALE RS-M2QJ 2-BAY RAID - Manual (Page 26)

26
2. Once selected, the RAID MASTER will give an alert popup window stating,
“all data on disk will be lost. Proceed?” Click on “Yes” icon to confirm.
3. Once confirmed, the RAID MASTER will begin erasing the old RAID Mode
for the chosen hard disk(s). Once the process is completed, the “RAID
Status” and “Disk Information” should reflect the chosen hard disk(s) as
JBOD (None RAID). The chosen hard disk(s) RAID is/are now ready to
be used under the new preferred RAID Mode!