Oyen Digital DATATALE RS-M2QJ 2-BAY RAID - Manual (Page 21)

21
CONFIGURATION & REBUILD
Create A RAID
To setup RAID functions for the RAID System, please complete the following
steps:
Creating a new RAID mode will delete all data stored on the hard disk(s). If
you have important saved data in the hard drives, backup all data before
formatting the RAID Mode.
1. Under the “Configuration” option tab, select the RAID mode preferred and
click the “Create RAID/Apply” icon.
If cannot see what is/are connected as part of the RAID System, press the
“Refresh” button on top of the first sub-menu (top). The information should
appear afterwards.
Please review the RAID mode options under “RAID MODES” to choose the
best suitable RAID mode for your needs and desire. If the number of inserted
hard disk does not qualify the quantity needed for a particular RAID mode, the