Oyen Digital DATATALE RS-M2QJ 2-BAY RAID - Manual (Page 5)

5
PRECAUTIONS FOR THE RAID SYSTEM
General Precautions
¾ The main circuit board of the RAID System is susceptible to static
electricity. Proper grounding is required to prevent electrical
damage to the RAID System or other connected devices, including
the host computer. Always place the RAID System on a smooth
surface and avoid all dramatic movement, vibration and percussion.
¾ Do NOT place the RAID System close to magnetic devices (such
as a mobile phone), high-voltage devices (such as a hair dryer), or
near a heat source (such as on the dashboard of a car or any place
where it will be exposed to direct sunlight).
¾ Use only the power supply cable provided with the RAID System.
¾ Do NOT attempt to service this RAID System yourself. Please
contact Technical Support in regards to any parts other than the
ones already mentioned in the “Installation” section of this User’s
Manual.
¾ Do NOT block the ventilation. Proper airflow is required to ensure
reliable operation and to prevent overheating.
¾ Do NOT allow water to enter the RAID System.
¾ Do unplug the RAID System from the electrical outlet when not in
use to provide an ecological friendly environment.
RAID System Precautions
¾ Installation of RAID MASTER software in the host computer is
required for proper operation.
¾ Installation of additional equipment in the host computer may be
required. Visit our website at www.datawatchtech.com to download
the latest product information updates.
¾ Any loss, corruption, or destruction of data is the sole
responsibility of the user of the RAID System. Under no
circumstances will the manufacturer be held liable for the
recovery or restoration of any data.