Body Solid G2B - Manual (Page 9)

A s s e m b l y I n s t r u c t i o n s
Assembly of the G2B takes professional installers about 3 hours to complete. If this is the first time you have
assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the assembly steps sequentially,
the process will take time, but is fairly easy.
Assembly Tips
Read all “Notes” on each page before beginning each step.
While you may be able to assemble the G2B using the
illustrations only, important safety notes and other tips are
included in the text.
Some pieces may have extra holes that you will not use. Use
only those holes indicated in the instructions and illustrations.
NOTE: To find out the length of a particular bolt, measure its
shank (the long, narrow part beneath the head). Refer to the
following diagram:
Do not fully tighten bolts until instructed to do so.
Note: After assembly, you should check all functions
to ensure correct operation. If you experience
problems, first recheck the assembly instructions
to locate any possible errors made during assembly.
If you are unable to correct the problem, call the
dealer from whom you purchased the machine or
call 1-800-556-3113 for the dealer nearest you.
IMPORTANT!
Before you begin you should fold-out pages 82, 83 and 84.
This is a quick reference guide that shows all hardware
parts (in actual size) along with the corresponding key
numbers on the assembly instructions.
mm
Inch
9