Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & BigComm Software - Manual (Page 106)

BigStuff3 Pro SEFI System (LS1)
Version 1.0 105
automatically include number extensions for all subsequently saved files under the same
default file name.
Once the desired changes have been made, click OK at the bottom of the window. Your changes
will be saved.
75. Record Log (F8 – “Quick Key”)
The “Record Log” function is another way to initiate a data Logging event. To use this method,
go to the tool bar on Main Menu screen and left click on “Logging”. When the drop down
screen opens, hold the left mouse button down and slide the mouse until “Record Log” is
highlighted. Release the mouse button. A blank Log screen will open. To start logging data,
depress the space bar on the laptop keyboard once.
A data-logging event can be initiated by simultaneously depressing and holding the “Control”
(Ctrl) and “L” keys on the PC’s keyboard. Left mouse clicking on the “Take Log” icon from the
BigComm Main Menu screen will also start a logging event.
The ECU will log data for the time period defined in the Logger Configuration screen outlined
above. Once the logging event is complete, the ECU automatically stores the logged event as a
file, using the default file name, which was set up. The file should be saved in the Program
Files\BigStuff\BigComm folder. If not, navigate to this folder location. The next time the
BigComm will automatically save the logged file to this location.
76. View Log from File
To view a logged file go the BigComm main menu and click on the “View Logged File” icon.
The following window will open. Choose the desired file to view by double clicking the left
mouse button on the file. The logged file will open.
“Take Log” icon located on the
BigComm main menu screen.
View Logged File icon