Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & BigComm Software - Manual (Page 99)

BigStuff3 Pro SEFI System (LS1)
Version 1.0 98
In the screen print below notice that the same “Signals” appear in the Dash at the bottom of the
Cranking Fuel screen.
70. Save a Dash
Again, the recommended way to configure the “Default Dash” is to configure each of available
dash’s, or most frequently used dash’s, to your liking and then save them as the “Default Dash”.
This way, every time you open the BigComm software, the dash’s will be open to the preferred
configuration.
Available
Signals
Signal in the
Dash
Cranking
Fuel Dash
Cranking
Fuel Dash