Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & BigComm Software - Manual (Page 91)

BigStuff3 Pro SEFI System (LS1)
Version 1.0 90
Same as screen above with window maximized.
To change a value in the Boost PWM table, move the cursor using the PC’s mouse or arrow
keys to the cell to be changed. Input the desired value and hit “Enter” to save the change.
63. Boost Staged
When “Staged” mode is selected the time intervals between the boost stages need to be
configured. In the Boost Parameters table above, these inputs are defined as Stage 1, Stage 2
and Stage 3. Before the staged boost sequence can be enabled, 12 Volts needs to be present at